RhinoCAM 1.0:
RhinoCAM 1.0 is a plug-in that is completely integrated in Rhino 3.0 and requires Rhino 3.0 to be installed in order for it to run.  It is not a standalone application.  If you do not have Rhino 3.0 loaded on your machine you can download an evaluation version by clicking here.


This plug-in is a general purpose machining program for the general machinist. RhinoCAM includes 2-1/2 axis, 3 Axis and hole making operations.  It comes with hundreds of post-processors and a post-processor generator to create user definable post-processors. 

This product is ideal for the rapid-prototyping, hobby and educational markets where ease of use is a paramount requirement. Packed with sufficiently powerful manufacturing methods this easy to use package is not only effective but also attractively priced for the budget conscious or entry level buyer.
 

3 Axis toolpath simulation inside Rhino 3.0
 

NEW! - 4 Axis Add-On Module

4 Axis toolpath simulation inside Rhino 3.0

RhinoCAM 4th axis Add-On Product is a plug-in for Rhinoceros 3.0® that brings 4th Axis milling capability to Rhinoceros 3.0.  It is completely integrated in Rhino and is ideal for Jewelry manufacturers.  Key features of the product are:

  • 4th Axis Indexed Machining

  • Continuous 4th Axis parallel roughing and finishing operations

  • Continuous 4th Axis Engraving of curves including projection on surfaces

  • 4th Axis drilling with sorting

  • Advanced 3-D toolpath simulation

To learn more about RhinoCAM, please go to the Tutorials section to download tutorials. To download a working demo of this product go to Downloads.

The table below summarizes the toolpath generation features found in RhinoCAM 1.0. 
 

  RhinoCAM 1.0 4th Axis Add-On

2 1/2 Axis Milling

   
Pocketing

√

 √
Profiling √ √
Engraving √ √
Facing √ √
V-Carving √ √
Hole Milling √ √
Thread Milling √ √
3 Axis Milling    
Horizontal Roughing √ √
Parallel Finishing √ √
Horizontal Finishing √ √
Hole Making    
Automatic hole Selection, Sorting √ √
Drilling √ √
Tapping √ √
Boring √ √
Reverse Boring √ √
User defined drilling cycles √ √
4th Axis Milling    
4th Axis Indexed Milling   √
4th Axis Engraving with Curve Projection   √
4th Axis Parallel Roughing   √
4th Axis Parallel Finishing   √
4th Axis Drilling   √
Toolpath Simulation    
Toolpath Animation √ √
Cut Material Simulation √ √
Advanced Cut Material Simulation   √
Post-Processor Generator    
User customizable post-processor generator √ √
User Defined Cycles √ √
Helix Output √ √
Spiral Output √ √
Simulate Cycles √ √
X-pert DNC    
Direct numerical control √ √
MetaCut Utilities    
G-Code Analysis Verification Tool √ √